Showing posts with label laundry room. Show all posts
Showing posts with label laundry room. Show all posts

March 30, 2010

Antique Metal Sign DIY

I saw this laundry sign in a popular store for way too much money so I made my own. I happened to find a piece of sheet metal exactly the size I needed in my Dad’s shop, we think it was an old electrical panel cover. You could easily make your own by cutting a piece of sheet metal.

Step 1 
Spray paint the base coat whatever color you want (Rust O’leum Aqua) let dry. Make your stencil using a program such as photoshop. If you don’t have photoshop or want to save time you can download my PDF’s. My stencil is in three pieces in order to fit on regular printer paper, after you cut out the writing then tape all three sheets of paper together.

Step 2
After the paint is completely dry spray the back of the stencil with spray adhesive, let it dry a few seconds, apply your stencil. This is the tricky part, getting it on straight and even. As you can tell mine is a little crooked, I didn’t mind because I wanted it to look a little more rustic anyways. Whenever I mess up on something I always say, “That’s just how I wanted it.” 

Make sure your entire base coat is covered up by either the paper stencil or with blue painter’s tape, except where you want your topcoat to be. (Rust O’leum Antique White) Spray with a thick coating of topcoat, let dry. Peel off stencil.

Step 3

Step 4
Use sand paper and sand around edges and across the writing to make it look older. Spread a thin layer of glaze or dark stain over the top and wipe off until the desired affect is achieved. I did this several times using very thin layers until it looked aged.

Download the PDF's here:
Stencil Part 3

Link Party
The Twice Remembered Cottage 
Cottage Instincts 
Between naps on the porch 
The Girl Creative
Sumo's Sweet Stuff
The Persimmon Perch
Skip to My Lou  
Keeping it Simple 
A Silly Little Sparrow
Today's Creative Blog
Reinvented
A Soft Place to Land
Tip Junkie
Cottage Dreamers 
My Backyard Eden
The Thrifty Home
It's So Very Cheri
We are that family
Just a Girl
Blue Cricket Design
Someday Crafts
Trendy Treehouse
Women who do it all
The Shabby Chic Cottage
Beyond the Picket Fence
Somewhat Simple
Thrifty Thursday
Life as Lori
The Shabby Nest
Finding Fabulous
My Romantic Home
It's Fun to Craft
Kojo Designs
Remodelaholic
Fingerprints on the Fridge
Lit and Laundry
Funky Junk Interiors
One Crafty Mommy
Poppies at Play
Tatertots and Jello


March 7, 2010

Vintage grain sack roman shade


Vintage Grain Sack Roman Shade Tutorial: part II
If you missed my first tutorial on how to make your own replica of a vintage grain sack go here  Vintage Grain Sack Tutorial: Part I Now we will turn that burlap material into a roman shade.
Materials:
Backing material/muslin: enough to cover the back of your shade, mine was about 1 yard
Rotary cutter, cutting mat, ruler & measuring tape
Edging material: enough to fit your shade
6 1/2" diameter plastic roman shade rings
Needle and thread
2 L-brackets

To make this a little easier to understand, my measurements will be in (parenthesis) but your measurements will be different.
1.       The hardest part about making this is getting all your measurements right.  Measure the width of your window. (29.5” W x 35.5” L) Figure out how wide you want the trim to be (2.5”) multiply this by 2 (5”) subtract this from the width of your window (24.5”) now add 1” for seam allowance (25.5”) this is how wide to cut your grain sack & backing piece/muslin. For the length, I measured my window and then added 5” inches for bunching. You can cut the length to whatever you like, either just enough to hang straight or extra material for gathering. 



Take the width you would like your trim to be (2.5”) add ½” for seam allowance (3”) then multiply this by 2, (6”) we will be doubling up the trim pieces. Cut two pieces this width (2 of 6”) and 1” longer than your grain sack.

2.       Lay the grain sack out right side up; lay the muslin down on top of the grain sack, right side down, so the right sides are facing together. Pin along the very top and bottom of what will be your shade. Sew with ½” seam allowance across the top, and bottom.  After sewing this, I used a surger just to make sure my burlap wouldn’t fray. Turn right side out and press the seams along the top and bottom with an iron.

3.       Next I surged along the two side seams, to prevent the burlap from fraying. If you don’t have a surger you could use a zigzag stitch instead.
4.       Take a side trim piece folded in half; press it with an iron to crease it. Then to give it a finished edge, turn one end at the top inside out, sew along the top using a seam allowance of ½”, clip your corner, turn it right side out and press along the seam.  Repeat until all four corners are done.

5.       Take one trim piece; place it on the grain sack with right sides together and pin all along the edge. Sew the trim piece using ½” seam allowance. Turn and press seams until flat. Repeat for other side.

6.       On the back of the shade hand sew three plastic rings on each side, left and right. To figure out where your rings should go, think about what you want the bunching to look like. I decided to sew mine on the edge of where the burlap material meets the white trim. I put the first ring ¼” up from the bottom and the next equally spaced 6” apart. Sew them similar to how you would sew a button, but only go through one layer of fabric, so it doesn’t show on the front. I sewed several loops around my rings and then tied a knot. Just to clarify, my picture originally shows me sewing the rings right on the edge of the trim, I found this didn't work right, so I moved them in a few inches, as per the black writing added to my picture.
7.       Measure out one length of the curtain and cut your two pieces of cording this long. Tie one piece of cording to each bottom ring and thread it through the remaining rings. Mount your curtain in your window. I used a piece of wood screwed into the window seal with two L brackets, and draped my curtain over the top. Pull on the cording until you achieve the desired look. After I got the cording and rings situated to where I wanted I threaded the cording back through the rings tying it in knots. You could hand sew it in place or use a hot glue gun to tack it down.


 



The finished product! Now I'm off to makeover the rest of my laundry room ;)







giveaways

February 25, 2010

Goal: laundry room makeover

I've been wanting to get my laundry room organized and re-painted for so long. I just couldn't decide on which color or style to go with. I think I've finally narrowed down my plan so here it is....



I recently saw in a magazine the cutest roman shade made out of a vintage feed sack. I've been scouting them out on ebay but they're pretty pricey, however I think I can replicate this with a piece of burlap, a stencil and some paint. Check back later for my results. 

My plan is to paint the walls this coral color, using turquoise accents, and paint the cabinets a sand color. And of course to hang up this cute sign Jen and I saw at Anthropologie.

I'm giving myself exactly one month to get this project done; I'm such a procrastinator when it comes to painting. So check back and see if I reach my goal.
Related Posts Plugin for WordPress, Blogger...